C-Series Mobile Boat Hoist

C-Series Mobile Boat Hoist 150-1500 TONS

Select Marine Travel Model

150 CII Mobile Boat Hoist

Protect your customers’ valuable yachts and sailboats during every lift with the reliability you trust. Designed with a 12-sling hoist, the 150 CII is our most versatile machine that lifts everything from short tugs to long sailboats with ease and efficiency.

Martin Walter Company

Capacity

150 metric tons
330,000 lbs. / 150,000 kg

Details:

  • Ideal for large yachts, sailboats and powerboats up to approx. 130 ft. (40 m) in length
  • Also capable of lifting dense tugs, fishing boats and patrol boats
  • Designed for the needs of commercial yards
  • Optional sling sets further diversify lifting capabilities

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

200 CII Mobile Boat Hoist

Get the versatility and durability your yard needs to stay on the leading edge. The 200 CII’s compact hoist system with optional sling adjustment and spreader options is ideal for lifting any type of vessel, even longer boats.

Martin Walter Company

Capacity

200 metric tons
440,000 lbs. / 200,000 kg

Details:

  • Tugs and fishing boats up to approx. 75 ft. (23 m) long
  • Yachts and sailboats up to approx. 130 ft. (40 m) long
  • Uses a unique 4-hoist configuration and 4-ply sling system
  • Simulates an 8-hoist system to handle fragile wood hulls with the optional additional slings

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

250 CII Mobile Boat Hoist

The 250 CII boat hoist is ideal for yards with special requirements. Its top forward beam will allow it to handle vessels with large upper structures easily. Please contact your local dealer for more information and to find out if the 250 CII is the right hoist for your yard.

Martin Walter Company

Capacity

250 metric tons
550,000 lbs. / 250,000 kg

Details:

  • Yachts up to approx. 130 ft. (39 m) long
  • Uses a 6-hoist configuration and 4-ply sling system
  • Ideal for the needs of commercial yards

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

300 CII Mobile Boat Hoist

More speed, more efficiency, more sling adjustment with a top forward beam for more clearance. The 300 CII is the newest machine that delivers all of the strength, efficiency, and versatility you need to help increase your yard’s productivity.

Martin Walter Company

Capacity

300 metric tons
660,000 lbs. / 300,000 kg

Details:

  • Yachts up to approx. 130 ft. (39 m) long
  • Versatile system lifts vessels large and small
  • Uses a 6-hoist configuration and 4-ply sling system
  • Ideal for the needs of commercial yards

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

400 C Mobile Boat Hoist

Maximize your all-around lifting capacity in width, length, and weight. The 400 C boat hoist’s long sling spacing and sling adjust to give your yard the ability to lift everything from short, heavy workboats to megayachts.

Martin Walter Company

Capacity

400 metric tons
880,000 lbs. / 400,000 kg

Details:

  • Yachts and megayachts up to approx. 160 ft. (48 m) long
  • Lift vessels from racing sailboats to heavy tugs
  • Uses an 8-winch, 8-hoist block system (4 sling sets) specifically designed for longer boats
  • Allows optimized sling positioning to avoid appendages and stabilizers
  • Maintain complete lifting functions using only 2 or 3 sling sets to adapt to vessel lifting requirements
  • Ideal for the needs of commercial yards

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

400 TG Mobile Boat Hoist

Maximize your all-around lifting capacity in width, length, and weight. The 400 TG boat hoist’s long sling spacing and sling adjust to give your yard the ability to lift everything from short, heavy workboats to megayachts.

Martin Walter Company

Capacity

400 metric tons
880,000 lbs. / 400,000 kg

Details:

  • Unique lifting block arrangement allows the machine to lift a variety of commercial vessels such as heavy tugs
  • Uses a 4-winch, 8-hoist block system (2 sling sets) specifically designed for longer boats
  • Uses a triple 10″ wide sling package to provide high sling safety factor and avoid hull appendages
  • Maintain complete lifting functions using only 2 or 3 sling sets to adapt to vessel lifting requirements
  • Beam forward design of structure allows for more inside clearance for vessels

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

500 C Mobile Boat Hoist

Combining the strength of three sling sets with additional clearance, the 500 C is the proven solution that has delivered decades of reliability for boatyards. Its top beam extension also allows it to handle vessels with large upper structures easily.

Martin Walter Company

Capacity

500 metric tons
1,100,000 lbs. / 500,000 kg

Details:

  • Yachts, megayachts and superyachts up to approx. 180 ft. (55 m) long
  • Short, heavy tugs and long crew boats up to approx. 200 ft. (61 m) long
  • Designed for efficiency and precision when moving in and out of buildings
  • 16-wheel design offers low pressure and low corner load, reducing the need for ground preparation and infrastructure cost
  • Designed with 3 sling sets
  • Optional 8-hoist configuration is available

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

550 C Mobile Boat Hoist

Combining the strength of three sling sets with additional clearance, the 550 C is the proven solution that has delivered decades of reliability for boat yards. Its top beam extension also allows it to easily handle vessels with large upper structures.

Martin Walter Company

Maximum Capacity

550 metric tons
1,200,000 lbs. / 550,000 kg

Details:

  • Yachts, megayachts and superyachts up to approx. 180 ft. (55 m) long
  • Short, heavy tugs and long crew boats up to approx. 200 ft. (61 m) long
  • Designed for efficiency and precision when moving in and out of buildings
  • 16-wheel design offers low pressure and low corner load, reducing the need for ground preparation and infrastructure cost
  • Designed with 4 sling sets
  • Optional 8-hoist configuration is available

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

620 C Mobile Boat Hoist

Make a difference in your yard’s productivity. From short, heavy tugs to large crew boats and long yachts, the 620 C is built with optimal sling adjustment to lift and haul a wide variety of your heaviest loads at maximum capacity.

Martin Walter Company

Capacity

620 metric tons
1,364,000 lbs. / 620,000 kg

Details:

  • Ideal for commercial yards handling diverse vessels – tugs, fishing, crew boats, ferries, barges andmega yachtss up to approx. 200 ft. (61 m) long
  • Designed with 3 sling sets: 1 rear set with 23 ft. of sling adjustment, 1 center set with 18 ft. of sling adjustment, and 1 set located in front of the top beam to reduce wheel load
  • 16-wheel design offers low pressure and low corner load, reducing the need for ground preparation and infrastructure cost
  • Optional 8-wheel in-line design to work on piers designed for smaller hoists

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

700 C Mobile Boat Hoist

Lift and then haul your heaviest loads exactly where they need to go – even when space is limited. The 700 C boat hoist comes standard with four sling sets and all electronic wheel steering to handle the biggest vessels with precision.

Martin Walter Company

Capacity

700 metric tons
1,540,000 lbs. / 700,000 kg

Details:

  • High power all wheel electronic steering comes standard
  • Various standard and optional sling adjustment capabilities for any type of vessel you need to lift
  • 16-wheel design offers low pressure and low corner load, reducing the need for ground preparation and infrastructure cost
  • Designed with 4 sling sets

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

820 C Mobile Boat Hoist

Whether lifting tall megayachts, long cargo vessels, or large tugs, the 820 C boat hoist is the hard-working solution for your yard. Its proven structure with four sling sets delivers a wide load distribution and low ground pressure for long and wide vessels.

Martin Walter Company

Capacity

820 metric tons
1,804,000 lbs. / 820,000 kg

Details:

  • Megayachts up to approx. 263 ft. (80 m) long
  • Small vessels as short as approx. 60 ft. (18 m)
  • 8 winches and 8 independent hoist blocks (4 sling sets) to lift long boats securely
  • Optional 6 adjustable hoist blocks to lift shorter boats
  • Optional larger tires offer a greater range of offset for the vessel’s center of gravity
  • Ideal for the needs of commercial yards

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

1000 C Mobile Boat Hoist

The 1000 C boat hoist proves that it is possible to lift and haul heavy loads and improve your yard’s productivity at the same time. This versatile hoist with four sling sets is the efficient, durable machine that allows you to leave the dry dock for larger vessels, and lift everything else.

Martin Walter Company

Capacity

1,000 metric tons
2,200,000 lbs. / 1,000,000 kg

Details:

  • Barges up to approx. 328 ft. (100 m) long
  • Smaller vessels as short as approx. 60 ft. (18 m)
  • Adaptable to the most challenging tug boat configurations
  • Designed with 4 sling sets
  • Optional larger tires offer a greater range of offset for the vessel’s center of gravity
  • Ideal for the needs of commercial yards

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

1250 C Mobile Boat Hoist

Cargo vessels, ferries, and LNG tugs are no problem for the 1250 C as it takes versatility to all-new levels. This hoist is an efficient, durable machine that allows you to leave the dry dock for larger vessels and lift everything else. It delivers the same durability and speed that you expect from Marine Travelift machines with 20% more capacity over 1000 C.

Martin Walter Company

Capacity

1,250 metric tons
2,750,000 lbs. / 1,250,000 kg

Details:

  • Specifically designed for lifting megayachts
  • Barges up to approx. 328 ft. (100 m) long
  • Smaller vessels as short as approx. 60 ft. (18 m)
  • Adaptable to the most challenging tug boat configurations
  • Designed with 4 sling sets
  • Ideal for the needs of commercial yards

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company

1500 C Mobile Boat Hoist

When your yard needs lifting power for the largest vessels on the market, trust the 1500 C boat hoist from Marine Travelift, for everything from cargo vessels, to LNG tugs, to superyachts and beyond. This hoist delivers the speed and strength you depend on to navigate your shipyard.

Martin Walter Company

Capacity

1,500 metric tons
3,310,000 lbs. / 1,410,000 kg

Pivot Trunnion

Reduce structural stress and get maximum rotation to accommodate extreme yard conditions. The articulated pivot trunnion allows your mobile boat hoist to travel over uneven ground, including unimproved dirt and concrete.

Martin Walter Company

Sling Adjust

Optimize the diversity of vessels your boat hoist can lift and maximize its lifting capacity. At the touch of a button, the operator can adjust each sling’s position to improve load balance and avoid stabilizers or other sensitive elements on the hull.

Martin Walter Company

Independent Hoists

Provide operators with full control of the load with separate independent control levers for each hoist. Separate pumps power each hoist, helping to synchronize every lift.

Martin Walter Company

Hoist Equalization

Prevents hull damage and balances loads with the continuous reeving system.

Martin Walter Company

Block and Spreader Configuration

Our Block and Spreader Configuration allows the slings to move around the vessel’s hull while keeping your block leveled. By allowing the spreaders to pivot in all directions, you avoid overloading slings and the ability to accommodate several diverse hull configurations without wire rope and sheave wear.

Martin Walter Company

Operator Cab

Quick and easy access to all controls so the operator can lift and move the mobile boat hoist with precision. It can also serve as a mechanical backup for the optional wireless remote control.

Martin Walter Company

Mechanical 90 Degree 2-Wheel Steering

From confined spaces in storage facilities to tight turns around the marina, our Mechanical 90 Degree 2-Wheel Steering provides a tighter turning radius. It helps get every boat exactly where it needs to be, easily, and efficiently.

Martin Walter Company

Formed Steel Structure

Reduces fatigue and extends the life of your machine with a beamformed structure. It gives the boat hoist more strength for more heavy-duty work year after year.

Martin Walter Company

Bolting Flange In Top Beam

Provides greater versatility with an easy reconfiguration of the boat hoist’s dimensions to meet various hull requirements.

Martin Walter Company

Lebus Grooves

Eliminate wire crossing and reduce wear to increase the life of the wire rope.

Martin Walter Company

Stainless Steel Tubing

Resists corrosion in harsh marine environments with 2205 stainless steel tubing.

Martin Walter Company

Chine & Keel Pads

Protect slings from chafing and abrasions with rubber-reinforced coverings that extend the life of your slings.

Martin Walter Company

Flat Faced O-Rings

Prevent leaks and blowouts in the hydraulic system.

Martin Walter Company

Cordura Covers

Protect hoses from harsh elements, damaging UV rays, and abrasions for longer service life.

Martin Walter Company

Hoist 2-Block Systems

Ensure 100% of available travel height and easily hoist tall and diverse vessels up to the very top without damage.

Martin Walter Company

PPG Siloxane Paint

Increase life and reduce corrosion with this standard 2-step PPG Paint process. A zinc-enriched epoxy primer and a polysiloxane topcoat provide superior performance for use in a wide variety of difficult marine environments.

Martin Walter Company